Our 3 Volt 1 amp power supply adapter can run 1 - 50 LEDs and is Guaranteed to correctly run all of our 3 Volt DC LEDs

• 1 Amp will run from 1 - 50 LEDs
• 2 Amp will run from 1 - 100 LEDs

These regulated power supplies will put out exactly 3 Volts of power if you hook one single LED to it, or hook the maximum number of LEDs to it. They are regulated and able to run delicate electronics like LEDs and circuits.

These UL listed Adapter / Transformers convert wall current to 3 Volt DC output, perfect for our 3 volt LEDs.

Input: AC 120-240V 60HZ 10W Output: Regulated 3V DC 1000mA Center positive

Dimensions:

• Plug Diameter 5.5mm
• Length 10mm
• 57 inches from the Adapter body to barrel plug 

Standard Power Jack is Included Free

The power jack receiving end plugs into our power adapter.  At the other end, we have added a short piece of red and black wire.

Here's how to use it:

• Mount this small power jack inside of your model.
• Connect the red power lead to all of the red leads on your LEDs, use shrink tube or electrical tape to protect the connection.
• Connect the black power lead to all of the black leads on your LEDs, again using tape or shrink tube.
• Make your connections on the inside of the model.
• When you are finished, plug in the adapter and enjoy your LEDs for years and years!
  
  

option: no switch