
What Tools Do I Need for Gunpla? A Beginner's Guide
For most beginner Gunpla builds, start with hobby nippers and a sanding stick or model-making glass file. Tweezers and a cutting mat are useful additions. A hobby knife, premium nippers, paint, and scribing tools can wait until you need them.
Gunpla means Gundam plastic models. Most modern Bandai Gunpla kits snap together without glue or paint, but removing parts from their runners is a separate step. Some kits are designed for tool-free part removal; others need cutters. Check your kit's instructions before starting.
At The Gundam Place Store, you can explore Gunpla tools and modeling supplies for basic assembly, cleaner nub removal, and later customization. Start with the job you want to do, then choose a tool that fits it.
What Gunpla tools should a beginner buy?

Can you build Gunpla without tools?
Some kits, including certain Entry Grade releases, have gates designed for parts to be removed by hand. Follow the manual for that specific kit. For a conventional runner, use hobby nippers instead of twisting the part free. Snap-fit means the parts connect without glue; it does not automatically mean that every part can be removed without tools.
Still choosing your first kit? Read our Gunpla beginner guide for an introduction to grades, assembly, and planning your first build.
How to use nippers and remove nub marks
A runner is the plastic frame holding the parts. A gate is the connection between the frame and a part. After cutting that connection, the small bump left on the part is called a nub.
Choose nippers for the work you will do
A basic double-blade hobby nipper is a practical starting point. For example, the GodHand PN-125 hobby nipper is described as an entry-level double-edged model. Compare the tool's cutting limits, grip, and intended materials before choosing it.
A precision single-blade nipper can be a later upgrade for controlled finishing cuts. It is not required for your first model. Do not treat a delicate finishing nipper as a general-purpose cutter: check the manufacturer's limits for thickness, material, and clear plastic.
Make controlled cuts
1. Find the runner letter and part number in the instructions. Remove only the parts you need for the current step.
2. Support the part and cut the gate away from its surface, leaving a small amount of plastic attached.
3. Trim the remaining gate gradually with a suitable cutter, leaving the final small nub for sanding if needed. Follow any special gate-removal instructions in the manual.
4. Keep the blades aligned and avoid twisting the nipper while cutting. Stop if you need excessive force.
Smooth the nub without changing the part
Use light pressure and inspect the surface often. A rigid sanding stick can help preserve a flat edge, while a sanding sponge can follow a curve. Choose an abrasive suitable for the remaining nub, then use finer abrasives as needed to refine the surface. Avoid sanding away nearby details.
A model-making glass file is another option. The GUNPRIMER RASER ORIGINAL is a glass gate-removal tool to consider. Check how the tool fits the area you need to reach; a large flat file is not ideal for every recessed or curved surface.
For an unpainted build, compare the cleaned area with the surrounding plastic as you work. Abrasion and polishing can change its sheen. Removing more material is not always the answer to a visible mark.
Do you need a hobby knife?
No. It can help with careful trimming, but nippers and sanding tools are enough for many beginner builds. If you use one, work over a cutting mat, keep your hands out of the blade path, and make light, controlled cuts. Cover the blade before storing it.
Which Gunpla tools can wait?
Add tools when you have a specific technique to try. A larger kit does not automatically need a professional workshop, and buying every accessory at once will not replace careful cutting and assembly.
For easier assembly and organization
Tweezers help position small markings, while a tray or runner organizer keeps the workspace manageable. A parts separator can help release an incorrect connection. Work gently and stop if the plastic starts to bend; some connections are difficult to reopen safely.
For panel lining and scribing
Panel lining adds color to existing recessed details. Scribing cuts or deepens the lines themselves. They are different techniques. GUNPRIMER GRIDA belongs in the scribing category; RASER products are for gate and nub removal.
Before using a panel-lining product, check its compatibility with the kit's plastic and any paint or finish already applied. For scribing, use a suitable guide, practice on spare material, and build the line with several light passes.
For painting and custom work
Brushes, masking tape, mixing containers, and parts holders become useful when you start painting. Drills, vises, and detail tools belong on the list when a particular modification needs them. Glue is generally unnecessary for a standard modern snap-fit build; choose an adhesive only for a specific repair or customization and check material compatibility.
Painting and sanding also require a suitable workspace. Follow each product's instructions for handling, ventilation, cleanup, and protective equipment. Paint systems differ, so choose compatible products and practice before working on an important part.
Common beginner mistakes to avoid
• Removing every part at once. Follow the manual a step at a time so similar pieces remain easy to identify.
• Twisting ordinary gates off by hand. Use nippers unless the kit specifically allows hand removal.
• Trying to finish a nub in one forceful cut. Leave a small amount of material and refine it gradually.
• Sanding too wide an area. Keep checking edges and molded details while you work.
• Buying upgrades without a purpose. Choose the technique first, then the tool it needs.
A sensible order for your first build
Prepare a clean, well-lit workspace. Read the next instruction step, remove the required parts, clean up the nubs, and assemble in the indicated orientation. Add the included markings when instructed. Treat painting or extensive customization as a separate project that may change the assembly sequence.
Frequently asked questions
What should I buy first if I have a limited budget?
For a conventional kit, prioritize hobby nippers and a sanding stick or suitable glass file. Add tweezers if you want help with small markings. You can use a simple household tray for organization and postpone specialized tools until you need them.
Are expensive single-blade nippers necessary?
No. A basic hobby nipper can handle a first build when used within its limits. A single-blade finishing nipper may be useful later, but it does not remove the need for careful technique or occasional cleanup.
Do I need glue or paint for Gunpla?
Most modern Bandai Gunpla kits are designed for snap-fit assembly and include colored plastic parts. Glue and paint are usually optional. Always check the instructions for your particular kit, especially if you are building an older release or a conversion project.
Should I choose a sanding stick or a glass file?
Either can be useful. Sanding sticks come in different shapes and abrasive grades; a model-making glass file is a reusable option for accessible nubs. Consider the part's shape, the size of the nub, and the finish you want rather than assuming one tool works everywhere.
Do Master Grade or Perfect Grade kits need different tools?
The same basic tool types can be useful across grades. Larger or more detailed builds may need extra workspace, organization, and more than one sanding shape. Check unusual gates and materials against your tools' limits. Specialized equipment depends on your finishing plans, not just the grade on the box.
Can I use nail clippers instead of hobby nippers?
Hobby nippers are the more suitable choice for conventional runners because their shape is designed to reach model gates. If you want to build without cutters, choose a kit that explicitly supports tool-free part removal and follow its instructions.
Find tools for your next build
Start with a small toolkit and build from there. Browse Gunpla tools and modeling supplies at The Gundam Place Store to compare cutting, sanding, and customization options. Check individual listings for current availability and specifications.
In the Metro Atlanta area? Visit The Gundam Place Store at 580 Atlanta Rd, Suite 202-B, Cumming, GA 30040, or contact our team for help choosing tools for your next project.
Choose your tools. Build with confidence. Never Stop Building!
