3 Volt Coin Cell Holder with Switch Wire

Description

An easy way to bring power to your 3V LEDs. Made to run our 3 Volt LEDs This fully assembled unit features a coin cell holder suitable for the common cr2032 battery Wire leads a convenient push-on push-off button switch to turn your item on and off. Related Items you will need Shrink Tube - Shrink Tube provides a nice solution for protecting the exposed wire connections. The coin cell holder with switch does not come with Shrink Tube, but you can get some on this product page: Shrink Tube Add some cr2032 batteries to your order along with the coin cell holder and you will be ready to run as soon as this package arrives. You can find more cr2032 batteries at stores. This coin cell holder switch unit will run from 1 - 10 LEDs safely and brightly. 3 Volt LEDs for use with this coin cell holder ***Solid LEDs need to be separate from any flash or flicker LEDs. Give flash or flicker groups their own coin cell.*** In our tests, 6 lights lasted over 12 hours on one battery. By 12 hours they were noticeably dimmer. A test of the battery at 12 hours showed the voltage was down from 3.0 to 2.6 volts. The lights continued to stay on at a nice level for several additional hours before another battery was needed. How we connect lights to this unit:As you can see from this picture, the 3V battery slips right into the holder. And the LEDs are connected red wire to red wire. And black-to-black. Protect connections with tape or use our shrink tube or your own, or use tape.We have 2 wire lengths on the coin cell holder. The 8" coin cell holder has 4" red wire either side of the white switch and 8" black wire The 4" coin cell holder has 2" wire either side of the switch and 4" black wire. It comes with a white switch.

*Length: 8 inch wires

*Battery not included