Conversion kit for the Gouf flight unit as seen in the manga and anime, Mobile Suit Gundam Thunderbolt.

The kit is entirely 3D printed using resin. The kit is made up of 20 individual pieces and requires assembly (superglue recommended for final assembly).

The MG scale kit has been designed to work with the MG Gouf 1.0 / Gouf Custom with very little modification needed (pre-existing holes on the back need to be widened to 1/8") and the 1/8" pins are included. The conversion kit will also work with the MG Gouf 2.0 and other gunpla with additional modification and the use of superglue.

The 1/144 scale version has been designed to work with the HGUC Gouf Custom as well as the HGGTO Zaku line with little modification needed.

Install Instructions:
HGUC Gouf Custom - Remove the upside down L shaped brackets on the back of the model kit, leaving just the two cylindrical pegs. Install flight unit backpack by securing the backpack to the pegs using the lower set of holes.

HGGTO Zaku Line - Install 1/8" pins (pins included) into upper set of holes on flight unit backpack. Enlarge the holes on the model kit's back by using a 1/8" drill bit. Install flight unit backpack.

The conversion kit will work with the majority of HG models but further modifications may be needed and superglue is recommended.

Can be primed and painted like any other gunpla kit / accessory (sanding required for clean-up and optimal paint results).

* - Mecha model kits and other scaled items in photos for illustrative purposes only and is not included in listing

This 3D printed item is designed and produced in the United States by Fallout Hobbies and Project V Hobby, respectively.